Does Muji live up to the hype

Beginners ask - steam "oldies" answer

Welcome! Log in or register.

In order to be able to write or comment, you need a user account.

Advertising is greatly reduced for registered members.

Do you already have a user account? Sign up here.

Register now

Here you can create a new user account.

Create a new user account
  • Ahhhhh .... by no means the Ammit ... 1. the thing whistles like a ski whistle when using a single hole. 2. If he drinks like a hole with moderate power 3. The winding technology is more than bitchy 4. I exchanged it several times because the deck was milled crooked and it always had a gap of several millimeters to the AT. Now I get a new deck from Geekvape after a lot of email traffic ... but it stays in my drawer. The Ammit was the reason to buy high-quality devices, which are not that bitchy and well-made. Incidentally, the Ammit does not really do justice to the YT taste hype that has been bought.

  • If the wadding doesn't keep up with the refill, I'm more likely to have a problem with swaddling. Too much cotton?

    I guessed it at first. Sure, I'm a beginner and I've already misplaced too much. But I just don't want to succeed with this cotton wool. A buddy has an evaporator with a ready-made coil and a self-winding machine. But he doesn't want to do the self-winding and has given me the enclosed cotton wool. It's only a 10 cm piece. I didn't have any problems with this cotton wool the first time. It's kind of weird.

  • Ahhhhh .... by no means the Ammit ... 1. the thing whistles like a ski whistle when using a single hole. 2. If he drinks like a hole with moderate power 3. The winding technology is more than bitchy 4. I exchanged it several times because the deck was milled crooked and it always had a gap of several millimeters to the AT. Now I get a new deck from Geekvape after a lot of email traffic ... but it stays in my drawer. The Ammit was the reason to buy high-quality devices, which are not that bitchy and well-made. Incidentally, the Ammit does not really do justice to the YT taste hype that has been bought.

    Ok .. which one would you recommend to me then? How did you use it?

  • It's all a question of your personal budget

    Can only tell you that I only use the SQ N duro and as the 2nd I tested the Flash e Vapor 4.5+ as a clone, was thrilled and the original came today. Since using these two, the rest is in the drawer and gathering dust. The Flashi has the advantage that anyone can wind it blindly and everything fits immediately, even when cloning.

  • I used the Ammit from 10 to 20 watts. Then there is my personal limit. But you can also easily use it as a DL with the amount of air when it is completely open ... and it runs smoothly

  • It's all a question of your personal budget

    Can only tell you that I only use the SQ N duro and as the 2nd I tested the Flash e Vapor 4.5+ as a clone, was thrilled and the original came today. Since using these two, the rest is in the drawer and gathering dust. The Flashi has the advantage that anyone can wind it blindly and everything fits immediately, even when cloning.

    Well, there would be more than enough budget. But now 150 € for a vaporizer, I'm too stingy then.

    I don't want a cheap, thrown after vaporizer, but priced between 40 - 50 €.

    I just want a device that is reliable, easy to wrap, and tight. I'm not a gourmet now, so if he doesn't get 100% out of a liquid, I don't care. It has to be at least an MTL atomizer and it should have at least a 4ml tank.

    I would be very happy to receive suggestions.

  • I don't know if this is allowed here, but had my clone from Amazon. Was 27 euros. Was super processed, holding O rings and the wicks for 4.5 I had on Ebay for 10 pieces. So the price is completely ok and you can test it before you put 150, - Tacken in the sand. Incidentally, as I said, whether original or clone, easy to wrap, siff-safe and so far the best taste for me ... even beats the N duro and the Prime for me.

  • I exchanged it several times because the deck was milled crooked and it always had a gap of several millimeters to the AT

    sure it was the deck?

    Just ask on the side ... 510s on boxes can sometimes be crooked.

    Otherwise - MTL - I'm out. I can't, I don't like, I have no idea.

    But something very fundamental

    - Full quotations are absolutely unwelcome

    - you can also edit contributions within a period ...

  • sure it was the deck?

    Just ask on the side ... 510s on boxes can sometimes be crooked.

    Thanks YMG, the deck was definitely. After screwing it up and down 15 times at various AT, I measured the thing

  • Moin @Diablo

    Because you may not have had any luck with the Ammit MTL and may not have come to terms with it,

    you don't have to describe the VD as unsuitable here ...

    Tomse, the Ammit MTL is easy to wrap, just tricky with the cotton wool

    Read yourself there >> Ammit MTL

  • Nabend @Frau_Tetzlaff,

    I have only given my personal opinion on the Ammit, as everyone probably does who is either satisfied or not.

    What the questioner does with it is up to him.

    That has nothing to do with getting along, because he just doesn't keep what he pretends to be.

    Furthermore, for me, winding also includes bewattening. jeder Anyone can fumble around n pieces of wire.

    But back to the origin: Tomse is looking for something simple and MtL and the Ammit is not one of them! Even if this is represented differently by paid hype. In this sense, I also stand by what I write.

    have a nice evening ... 🖐

  • Thank you @Frau_Tetzlaff and thank you @Diablo,

    I read it a little bit and think I'll give him a chance. After unpacking, screw on the AT right away, then I can see whether it is crooked.

  • On-line

    As an MTL vaporizer then the new Dotmod MTL RTA, which has a good price, is quiet, tastes fantastic and is currently one of the best MTL RTA on the market.

    https://dotmod.com/products/dotmtl-1?variant=18997571518537

    Costs around € 60 here in Germany and is worth every penny.

  • 🤣Exactly ... then have fun beforehand. Fortunately, tastes are also different when it comes to hardware. Just use the Ammit MtL Rda to test mixtures. It's mega🤘

  • Good Morning

    That has nothing to do with getting along, because he just doesn't keep what he pretends to be.

    I think you are making a little mistake in thinking.

    How well a vaporizer is suitable for entry-level always depends on the extent to which it accommodates the winder's handicraft skills.

    Here on board, for example, the Flashi in all its variations is recommended, but some of them have already grown gray hair when thinking about making the mesh wicks.

    There are also 2 YT videos of my GTVs (Flashi Clown), in both of them it was pretty much torn because the wire is supposed to be screwed very badly.

    If you take a closer look at the videos, it quickly becomes clear that the screwdrivers themselves were the mistakes.

    Greets from the valley
    Stefan


    On the mechanical side of the power I am.