Why do we use a Taber abrasion tester

Translation of "Taber abrasion test" in German

These examples may contain rude words based on your search result.
These examples may contain slang words based on your search result.
A molded article according to claim 1, wherein the silicone hard coat layer has a haze value of 1.0% or less after subjected to Taber abrasion test.
The molded article according to claim 1, wherein the silicone hard coat layer has a haze value of 1.0% or less after being exposed to one Taber abrasion test was subjected.
The flat glass product of Claim 5 wherein a surface of the product has a haze difference (percent) equal to or less than 0.50 for 500 cycles as tested by the Taber abrasion test of ASTM C-501.
A flat glass product according to claim 5, wherein a surface of the product has a haze difference (%) equal to or less than 0.50 for 500 cycles as checked by the Taber wear test ASTM C-501.

further results

The hardness of the coating layer that usually covers these floors is measured with the Brinell test for fine surfaces and Taber abrasion tests according to ISO 9352 or ASTM D 1044.
The hardness of the layer of varnish that usually covers these floors with the Brinell test measured for thin surfaces and Taber abrasion test according to ISO 9352 or ASTM D 1044.
The composition according to any one of claims 7-8, wherein an about 5 µm thick layer of the composition, after cure, has a light transmittance of at least 90% and a haze value after the Taber's abrasion test of less than 40%.
A composition according to any one of claims 7 to 8, wherein an approximately 5 µm thick layer of the composition has a light transmittance of at least 90% after curing and a haze value after curing Taber Abraser Test of less than 40%.
Alongside the DIN abrasion other Taber abrasion, the NBS test to ASTM D1630 constitutes a third method. This, however, can only be applied to compare PU cast elastomers to rubber elastomers, as is still required in a number of shoe applications.
Next DIN abrasion and Taber abrasion is available with the so-called NBS test A third method according to ASTM D1630, which, however, only plays a role for PUR cast elastomers in comparison to rubber elastomers. This comparison is still required in some shoe applications.
The article of claim 1 wherein the release layer improves the Taber abrasion resistance of the sheet.
Alongside this, there is another method that is similarly measured according to DIN but which has come to be known as "Taber abrasion".
Laminate according to one of the preceding claims, characterized in that its Taber abrasion Resistance, measured according to the NF-EN-483-2 (1991) standard, is greater than or equal to 3000 revolutions.
Laminate according to one of the preceding claims, characterized in that it has a Taber abrasion resistance, determined in accordance with the NF-EN-483-2 (1991) standard, greater than or equal to 3000 revolutions.
Built-in sink as defined in claim 12, characterized in that the Taber abrasion value on the visible side in the regions of the component subject to severe wear and tear during use is at the most approximately 3.5 mg / 100 r.
Built-in sink according to claim 12, characterized in that the Taber abrasion on the visible side in the areas of the component that are heavily stressed during use is a maximum of approx. 3.5 mg / 100 r.
The product of Claim I wherein said abrasion wear resistant coating material undergoes a change in haze of less than 2% as measured by ASTM D1003 during Taber abrasion as described in ASTM D 1044.
Product according to claim 1, wherein the abrasion resistant Coating material exhibited a change in haze of less than 2% as measured by ASTM D1003 during the Abrasion to Taber, as described in ASTM D1044.
A composition in accordance with claim 4 which, when cured, exhibits a Taber abrasion resistance of T-100 of 5 or less and a T-500 of 10 or less.
The composition of claim 4 which, when cured, is a Abrasion resistance to Taber T-100 of 5 or less and Taber T-500 of 10 or less.
Tools / technical equipment - janoschka Packaging, Decor, Security, Solutions, Prepress Portfolio print Abrasion test sheet For the ink manufacturers' abrasiveness Testing we manufacture abrasion test sheets which match our gravure cylinders in their surface texture.
Tools / technical equipment - janoschka Packaging, Decor, Security, Solutions, Prepress Portfolio print Abrasion test panel For Abrasiveness tests the paint manufacturer we manufacture Abrasion test panelswhose surface properties match our gravure cylinders.
For sun roofs, no abrasion test is required.
They are made from perforated cowhide that has passed every abrasion test and thus guarantee excellent safety (CE - Category II - Directive 89/686 / EEC certified).
They are made of perforated cowhide that each Abrasion past to test and thus guarantee a high level of safety (CE - Category II Directive 89/686 / EEC certified).
The result has been confirmed in abrasion tests at SP, Sweden's Institute of Materials Testing.
SIRO COMFORT sets new standards in product advantage and functionality in the way the formation of holes is delayed by 50 per cent in abrasion tests.
In terms of product benefits and functionality, SIRO COMFORT sets new standards by delaying the formation of holes in the Abrasion test by 50 percent.
Two belts or restraint systems are required for the inspection of the buckle, the micro-slip test and the abrasion test.
The abrasion test is to be carried out only at the discretion of the laboratory conducting the test with due regard to the information already at its disposal.
The Abrasion test is only carried out if the inspection body considers this to be necessary based on the information available.
A polybenzazole fiber according to claim 1, wherein the number of cycles to the rupture in the abrasion test is 5,200 or more.
Polybenzazole fiber according to claim 1, wherein the number of cycles to break is at Wear test 5200 or more.
El SOLITARIO's Bonneville Protective Coverall with Dyneema is manufactured using only the toughest materials and is capable of passing the CE standard impact abrasion test EN13595.
EL SOLITARIO's Bonneville Protective Coverall with Dyneema is made of the most resistant materials and passes the CE Test for abrasion resistance EN 13595.
Content May Be Inappropriate. Examples are only used to help you translate the word or phrase you are looking for in different contexts. They are not selected or reviewed by us and may contain inappropriate language or ideas; please report examples that you would like to edit or not display. Tactless or colloquial translations are generally marked in red or orange.
No results were found for this meaning.

Results: 35. Exact: 2. Elapsed time: 260 ms.

Documents Business Solutions Conjugation Synonyms Spell check Help and About Us

Word index: 1-300, 301-600, 601-900

Term index: 1-400, 401-800, 801-1200

Phrase index: 1-400, 401-800, 801-1200

© 2013-2020 Reverso Technologies Inc. All rights reserved.